本文共 4386 字,大约阅读时间需要 14 分钟。
ASP.NET Core 中的 Route 中间件的职责在于将 request 匹配到各自 Route 处理程序上,Route 分两种:基于约定
和 基本特性
模式。
基于约定
模式的Route采用集中化的方式,而 基于特性
的方式允许你在 Action 或者 Controller 上单独定义,到底采用哪一种可以基于你自己的应用场景,本篇就来讨论如何使用 基于特性
模式。
创建一个 DefaultController 类,新增如下代码。
public class DefaultController : Controller { [Route("")] [Route("Default")] [Route("Default/Index")] public ActionResult Index() { return new EmptyResult(); } [Route("Default/GetRecordsById/{id}")] public ActionResult GetRecordsById(int id) { string str = string.Format ("The id passed as parameter is: {0}", id); return Ok(str); } }
Route特性可用于 Controller 和 Action 级别,值得注意的是,如果应到到前者,那么 Controller 下的所有 Action 都受这个 Route 管控。
如果你仔细观察上面的 DefaultController 类代码,你会发现两个 Action 方法的 Route 路径都有 Default
前缀,这就不优雅了,优化方式就是把 Route
路径中的 Default 提取到 Controller 级别,代码如下:
[Route("Default")] public class DefaultController : Controller{ [Route("")] [Route("Index")] public ActionResult Index() { return new EmptyResult(); } [HttpGet] [Route("GetRecordsById/{id}")] public ActionResult GetRecordsById(int id) { string str = string.Format("The id passed as parameter is: {0}", id); return Ok(str); }}
可以看出当 Controller 和 Action 级别都被 Route 打上标记之后,Asp.Net Core 中的 Route 引擎会自动将两者拼接起来,当然更简单粗暴的做法就是在 Controller 上使用 RoutePrefix
特性,如下代码所示:
[RoutePrefix("services")]public class HomeController : Controller{ //Action methods}
参考刚才的 DefaultController 类,我在 Index 方法上面定义了三个 Route 特性,这就意味着下面三种 Route
都可以访问到 Index()
方法,如下代码所示:
http://localhost:11277http://localhost:11277/homehttp://localhost:11277/home/index
常常在 基于约定
模式的Route中,它的 Route template
会有一些对参数的约定,比如下面的代码:
app.UseEndpoints(endpoints => { endpoints.MapControllerRoute( name: "default", pattern: "{controller=Home}/{action=Index}/{id?}"); });
同样 基于特性
模式的 Route 也是可以使用参数模式的,比如文章之前的 DefaultController.GetRecordsById
就是的,值得注意的是模板中的 {id}
表示可接收任何参数,如 string,int 等等,如果你想限定为 int 的话,也是可以实现的。
Route 约束
就是 Controller 前的一个防火墙,他会踢掉一些不合规范的 Action 请求,比如说:你要求某个 Action 接收的参数必须是 int,那在 Route 模板中定义的语法格式一定是这样的 {parameter:constraint}
,如下代码所示:
[Route("Default/GetRecordsById/{id:int}")]public ActionResult GetRecordsById(int id){ string str = string.Format("The id passed as parameter is: {0}", id); return Ok(str);}
你也可以在 Route Template 上指定可选参数,意味着这个参数可传可不传,格式如下:
[Route("Sales/GetSalesByRegionId/{id?}")]
有一点非常重要,当你使用了 Route特性 之后,其实 Controller 或者 Action 的名字就不再重要了,因为 Route处理引擎 已经不再将其作为参考选项,下面的代码片段展示了如何在 Action 方法上变更 Route template 格式。
[Route("Home/GetRecordsById/{id:int}")]public ActionResult GetRecordsById(int id){ string str = string.Format("The id passed as parameter is: {0}", id); return Ok(str);}
接下来可以直接使用如下地址访问 GetRecordsById 方法。
http://localhost:11277/home/GetRecordsById/1
真实场景中你不仅要求 id 必须是整数,还要求必须有一定意义,比如说最小值为1,对这种有 多重约束
的需求如何去实现呢?请看下面代码。
[Route("Default/GetRecordsById/{id:int:min(1)}")]public ActionResult GetRecordsById(int id){ string str = string.Format("The id passed as parameter is: {0}", id); return Ok(str);}
int 限定为 int 类型
max/min 限定 int 的最大数和最小数
minlength 限定 string 的最小长度
regex 限定符合的正则
如果上面的一些约束不满足你的要求,你完全可以为你的场景深度定制,做法就是使用 IRouteConstraint 接口并实现它的 Match 方法即可,如下代码所示:
public class CustomRouteConstraint : IRouteConstraint { public bool Match(HttpContext httpContext, IRouter route, string routeKey, RouteValueDictionary values, RouteDirection routeDirection) { throw new NotImplementedException(); } }
所谓的 token 占位符
就是具有一些特定含义的占位符号,比如说:[action], [area] 和 [controller]
,分别表示用你真实的 Controller 和 Action 去替换,下面的代码展示了如何使用这种模式去实现。
[Route("[controller]/[action]")]public class HomeController : Controller{ private readonly ILogger_logger; public HomeController(ILogger logger) { _logger = logger; } public IActionResult Index() { return View(); } //Other action methods}
整体来看,基于特性
的 Route 给了你更多的操控权限,灵活的 Route Template 配置实现了 Controller 和 Action 的解耦,当然这里也不是说 基于约定
的Route 不好,毕竟人家是 Global 级别的,真实场景下两者更多的是混着用。
译文链接:https://www.infoworld.com/article/3569369/how-to-use-attribute-routing-in-aspnet-core.html
转载地址:http://dwudi.baihongyu.com/